Sell Rescue line

Rope Light protection security lead lighting wire looks like PVC telephone wire, its surface is Colorful thermostable PVC tube,

 

 

Safety Glow rope lighting

Rope Light protection security lead lighting wire looks like PVC telephone wire, its surface is Colorful thermostable PVC tube, and there is KPT patent product inside: flexible neon wire. It emits continuous light and no radiative heat, its consumption of electricity energy is 50-70% of LED, 20-40% of bunch lamp.

Use field: traffic security sign and indication, Night Rescue equipment ,exit passage and stairway exit lead, temporary outdoor warning sign, reflective rope,shop centre/subway/coal mine and other places succor, concert lead line. Description

1)                     Easy to use, save energy, can light for 4-5 hours with battery once. It has a handle, can be under AC220V/110V or DC12V in car.

2)                     Light is peaceful and colorful, visibility distance is about 50-100m.

3)                     CE and RoHs, good for environment and health.

4)                     Operate easily, our lead wire is soft and flexible, can bend, cut and connect freely.

Technology index:

Diameter: 5.0mm and 8.0mm.   Color: Yellow, Orange, Transparent (blue-green)    Light intensity: 1-20 cd/m2       

Work current: 0.3A/m      Voltage of lighting inner cord: 120V, 1500Hz       Isolation voltage: 4000V and up.

Capacitance: 4nF/m with on/off switch.     Average lifetime: 1000 hours     Environmental temperature: -200C to 600C

Input condition: DC12V,3400mA, rechargeable storage battery, 5 hours for recharge, 4-5 hours for work.

Recharge time: 500 times. lead acid storage battery.   The burning point of surface PVC tube: 7000C

The visible distance of lighting: 30-100m     The visible time of The afterglow lighting: 2-5 hours

Luminescent density: 0.001Cd/m2       Execution standard :TFUJ 001-2008

.

 

(KPT¬—D200 Type)

1.Products in Package

1 PC of 200 M EL Wire Wheel,1 PC of AC220V/110V Charger,1 PC of 5 M Conneting Lead Wire,1 PC of Car Electrical Source Plug,1 PC of Solar charge Board,1 Bag of Plastic Binding Strip.

2. Application Method

1. Taking out the EL wire wheel.

2. Turn on the switch to judge if there is power or not. The function is On/Off/Twinkle.

3. Under the condition of lighting, EL wire can be pulled or reeled in.

4. To fix EL wire,Plastic binding strip can be used and removed repeatedly.

5. Rotate the handle to reel the EL wire in neatly for easy pulling next time.

3. Three Mode of Charging:

To turn off the switch before charging.1)To connect AC220V/110V Charger,Suggest to charge for 6~7 hrs for fully loading.2)Taking out Solar Board ,putting it on Sun irradiation area,connecting the Solar Board to charging hole in EL wire wheel with connecting lead wire,and continue charging for 8 hrs to reach 80% eletricity load. Pls. cut off the connecting lead wire to avoid discharging when you don’t charge.3)Car DC12V charge: Lauch car but do not step on accelerator peda, connect lead wire with Car Electrical Source Plug, then connect to Car power . To continune charge for 1 hr and reach 50% electricty load. And cut off the connecting wire while not charging to avoid discharging.

4. Technical Data:

Lighting Color: Blue-green, Weight: 20KG,Power: 60W,Fully loaded eletricity: 5 hrs for continuous lighting,7 hrs for Twinkling lighting,Obsevation Distance:100M,Maximum Resist Pull: 40 kgs,Glowing in dark time without electricity power:1-3 hrs,Lithium batteries: Charging /discharging is over 300 times,EL Wire Life-span: 1000 hrs,Under the condition of battery fully loaded, to keep dry for 30 days and,remaing electricity is 30%,Application Condition:DC12V,Frequency: 1500Hz,Application Limit Temperature: -20°C~ +60°C.

4.Remarks:

EL wire and wheel can not be used in rain or water environment.

Pls. do not launch engine when connecting with 12V Car power for direct application.

EL wire will not work or have Short circuit if bending angle is less than 45 degree or pulling

strength is beyond required resist of pull.

Pls. do not remove end parts or Inner equipment to avoid the invalidation of anti water ability and change of resist pull.

Switching circuit withs lighting power delay protect.